Dahua PFS4218-16GT-190 - Page 54

Advanced Settings 47
STP CIST port configuration Figure 4-64
Set the parameters in CIST Aggregated Port Configuration. See Table 4-17. Step 2
Table 4-17 CIST aggregated port configuration
Parameter
Description
STP Enabled
Select the checkbox to enable STP.
Path Cost
Select the Path Cost from the drop-down list. Auto and Specific are
selectable. If you select Spedific, you can set the path cost value
manually.
Priority
Set the priority. By default, it is 128.
Ad min Edge
Select from the drop-down list. Non-Edge and Edge are selectable.
Auto Edge
You can select the checkbox to enable auto edge.
Restricted
Role or TCN can be selected.
BPUD Guard
You can select the checkbox to enable BPUD guard.
Point-to-point
Select from the drop-down list. Forced True, Forced False, and Auto
are selectable.
Set the parameters in CIST Normal Port Configuration. See Table 4-17. Step 3
Click Save. Step 4