Advanced Settings 52
LLDPDU (Link Layer Discovery Protocol Data Unit) to release to the neighbors connected to
itself directly. The neighbors receive the information, and save it in standard MIB (Management
Information Base) format, for the network management system to quiry and judge the link
communication status.
LLDP
Select Advanced > Configuration > LLDP. Step 1
The LLDP Configuration interface is displayed. See Figure 4-70.
LLDP configuration Figure 4-70
Set the parameters including Tx Interval, Tx Hold, Tx Delay, and Tx Reinit in LLDP Step 2
Parameters.
Set the parameters including Mode, CDP aware, Trap, and son on in LLDP Interface Step 3
Configuration.
Click Save. Step 4
LLDP-MED
To Next Page
Loading...
