Advanced Settings 53
Select Advanced > Configuration > LLDP > LLDP-MED. Step 1
The LLDP-MED Configuration interface is displayed. See Figure 4-71.
LLDP-MED configuration
Figure 4-71
Set the Fast Start Repeat Count. Step 2
Set the Transmit TLVs and the Device Type in LLDP-MED Interface Configuration. Step 3
Set the location information in Coordinates Location. Step 4
Set the parameters including Country code, State, Country, City, City district, and so on Step 5
in Civic Address Location.
Add the ermergency phone number in Emergency Call Service. Step 6
Click Add New Policy. Step 7
A new record is added. See Figure 4-72.
To Next Page
Loading...
