Dahua VTO Series User Manual

5.4.1 Initialization
The default IP address of VTO is 192.168.1.110, and make sure the PC is in the same
network segment as the VTO.
Connect the VTO to power source, and then boot it up.
Open the Internet browser on the PC, then enter the default IP address of the VTO in the
address bar, and then press Enter.
Enter and confirm the password, and then click Next.
Select the Email check box, and then enter your Email address. This Email address can be
used to reset the password, and it is recommended to finish this setting.
Click Next.
Click OK. The login interface is displayed.

Dahua VTO Series Specifications

General

Category	Intercom System
Dimensions	Varies by model
Weight	Varies by model
Model	VTO Series (multiple models exist within the series)
Video Resolution	1080p, 720p (depends on model)
Audio	Two-way audio communication
Network Interface	Ethernet (some models support Wi-Fi)
Power Supply	12V DC or PoE (Power over Ethernet), Varies by model
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Weatherproof	IP65
Supported Protocols	SIP