Dahua VTO12 Series User Manual

9
Allocator
Port
Allocator corresponding ports
no. 4-ch allocator port is 1~4,
8-ch allocator port is 1~8.
5.2.3.2 Modify Digital/Analog VTH
Click on , in pop-up page, modify VTH information.
For digital VTH, you can only modify name information.
For analog VTH, you can only modify name, allocator address and port.
5.2.3.3 Delete Digital/Analog VTH
Click on to delete digital/analog VTH.
5.2.4 Allocator Manager
In page, select System Config>Allocator Manager.
You can view allocator ID, MAC address and etc.
5.2.5 Network Config
In page, select System Config>Network Config.
Set VTO IP network parameter, you can set VTO IP address, subnet mask and default
gateway. After you modify IP address, WEB page will reboot and go to the new set page.
See Figure 5- 7.
Figure 5- 7

Dahua VTO12 Series Specifications

General

Brand	Dahua
Model	VTO12 Series
Category	Intercom System
Language	English