Dahua XVR4108C-S2 User Manual

323
Figure 4- 35
4.1.4.5.2Snapshot
It is set snapshot mode for each channel, and picture size, quality and frequency.
Step 1 Click Snapshot tab, enter the following interface. See Figure 4- 36.
Step 2 Set parameters.

Manual snap: The manual snapshot amount. The value ranges from 1 to 5.

Snapshot mode: There are two modes: timing and trigger. If you set timing mode, you
need to set snapshot frequency. If you set trigger snapshot, you need to set snapshot
activation operation.

Image size: Here you can set snapshot picture size.

Image quality: Here you can set snapshot quality. The value ranges from 1 to 6.

Interval: It is for you to set timing (schedule) snapshot interval.

Dahua XVR4108C-S2 Specifications

General

Brand	Dahua
Model	XVR4108C-S2
Category	DVR
Language	English