Dahua XVR4108C-S2 User Manual

463

Move down: Click it to move current selected channel down.

Default: Click it to restore default setup.
Tips:

Use mouse or Shift button to switch and button to enable /disable tour.
means the tour funciton is enabled and meas tour funciton is disabled.

On the navigation bar, click or to enable/disable tour function.
Figure 4- 203
4.9.5.2.4Zero-channel Encoding
Click zero-channel encoding button, you can go to the following interface. See Figure
4- 204. Here you can enable and set zero-channel encoding function so that you can view
several video sources at one channel.

Enable: This function is disabled by default. Check the box here to enable this
function so that you can control the zero-channel encoding function at the WEB.

Compression: System default setup is H.264. You can set according to device
capability.

Resolution: The resolution value may vary due to different device capabilities. Please
select from the dropdown list.

Frame rate: The frame rate value may vary due to different device capabilities.
Please select from the dropdown list.

Dahua XVR4108C-S2 Specifications

General

Brand	Dahua
Model	XVR4108C-S2
Category	DVR
Language	English