Daikin Altherma EHVH04S23DAV - Page 105

9/9
Breadcrumb Field code Setting name Range, step
Default valu
e
Date Value
Installer setting at variance with
default value
Field settings table
9.I [D-0A]
0
9.I [D-0B]
2
9.I [E-00] R/O
0~5
0: LT s
p
lit
9.I [E-01] R/O
0
9.I [E-02] R/O
1: Heatin
g
onl
y
9.I [E-03] R/W
0: No heater
1: External heater
2: 3V
3: 6V
4: 9W
9.I [E-04] R/O 0: No
1: Yes
9.I [E-05] R/O
0: No
1: Yes
9.I [E-06] R/O 0: No
1: Yes
9.I [E-07] R/O
2: Inte
g
rated tank with BSH
9.I [E-08] R/O
1: Enabled
9.I [E-09]
1
9.I [E-0A]
0
9.I [E-0B]
0
9.I [E-0C]
0
9.I [E-0D]
0
9.I
[
E-0E
]
0
9.I [F-00] R/W
0: Disabled
1: Enabled
9.I [F-01]
20
9.I [F-02] R/W 3~10°C, step: 1°C
3°C
9.I [F-03] R/W 2~5°C, step: 1°C
5°C
9.I [F-04] R/W
0: No
1: Yes
9.I [F-05]
0
9.I [F-09] R/W
0: Disabled
1: Enabled
9.I [F-0A]
0
9.I [F-0B] R/W
0: No
1: Yes
9.I [F-0C]
1
9.I [F-0D] R/W 0: Continuous
1: Sample
2: Re
q
uest
--
Which type of unit is installed?
Which type of compressor is installed?
--
What is the indoor unit software type?
What is the number of backup heater steps?
Is the power saving function available on the outdoor unit?
Pump operation allowed outside range.
Is glycol present in the system?
--
--
Bottom plate heater ON temperature.
Bottom plate heater hysteresis.
Can the system prepare domestic hot water?
Is a DHW tank installed in the system?
What kind of DHW tank is installed?
Power saving function for outdoor unit.
--
--
What is the pump operation mode?
Is a bottom plate heater connected?
--
Pump operation during flow abnormality.
--
Close shut-off valve during thermo OFF?
Is a bi-zone kit installed?
--
(#) Setting is not applicable for this unit. 4P499575-1A - 2017.11
Final English - Tanslations in progress