Daikin Altherma EHVH04S23DAV - Detailed Screen with Values; Detailed Screen with Weather-Dependent Curve; Schedule Screen: Example

8 Configuration
Installer reference guide
50
ERGA04~08DAV3(A) + EHVH04+08S23DAV
Daikin Altherma – Low temperature split
4P499573-1 – 2017.12
6
1.6
bar
18 Feb 2018
22:19
55
18
21
45
f
i
j
h
g
e
d
a
b
c
Possible actions on this screen
Go through the list of the main menu.
Go to the main menu screen.
Enable/disable breadcrumbs.
Item Description
21
21
The temperatures are shown in circles. If the circle
is grey, the corresponding operation (example:
space heating) is currently not active.
Outdoor
unit
a2
a3
a1
a1
: Outdoor unit
a2
: Quiet mode active
a3 Measured ambient temperature
Indoor unit /
domestic
hot water
tank
b1
b2
b1 Indoor unit:
▪
: Floor-standing indoor unit with
integrated tank
b2 Water pressure
Space
operation
mode
c
: Heating
Disinfection
/ Powerful
d
▪ : Disinfection mode active
▪
: Powerful operation active
Date / time e Current date and time
Holiday f
: Holiday mode active
Main zone
g3
g1
g4
g2
g1 Heat emitter type:
▪
: Underfloor heating
▪
: Fancoil unit
▪
: Radiator
g2 Leaving water temperature setpoint
g3 Room thermostat type:
▪
: Daikin user interface used as room
thermostat
▪
: External control
▪ Hidden: Leaving water temperature control
g4 Measured room temperature
Additional
zone
h3
h1
h2
h1 Heat emitter type:
▪
: Underfloor heating
▪
: Fancoil unit
▪
: Radiator
h2 Leaving water temperature setpoint
h3 Room thermostat type:
▪
: External control
▪ Hidden: Leaving water temperature control
Item Description
Domestic
hot water
i1
i2
i1
: Domestic hot water
i2 Measured tank temperature
Malfunction j
or : A malfunction occurred
See "12.4.1To display the help text in case of a
malfunction"on page85 for more information.
8.3.3 Main menu screen
In the home screen, press
to open the main menu screen.
From the main menu, you can access the different setpoint screens
and submenus.
Possible actions on this screen
Go through the list.
Enter the submenu.
Enable/disable breadcrumbs.
Item Description
or
Malfunctioning
Restriction: Only displayed if a malfunction
occurs.
See "12.4.1To display the help text in case
of a malfunction"on page85 for more
information.
Room
Restriction: Only displayed if a room
thermostat is connected to the indoor unit.
Set the room temperature.
Main zone
Shows the applicable symbol for your main
zone emitter type.
Set the leaving water temperature for the
main zone.
Additional zone
Restriction: Only displayed if there are two
leaving water temperature zones. Shows
the applicable symbol for your additional
zone emitter type.
Set the leaving water temperature for the
additional zone (if present).
Space heating/
cooling
Shows the applicable symbol for your unit.
You cannot change the operation mode on
heating only models.
Tank
Restriction: Only displayed if a domestic
hot water tank is present.
Set the domestic hot water tank
temperature.
User settings
Gives access to user settings such as
holiday mode and quiet mode.
Information
Displays data and information about the
indoor unit.
Installer settings
Restriction: Only for the installer.
Gives access to advanced settings.
Commissioning
Restriction: Only for the installer.
Perform tests and maintenance.
User profile
Change the active user profile.
Final English - Tanslations in progress