Operation manual BRC2E52C7 / BRC3E52C7
53
4P368042-1 - 2014.02
Menu Manipulation
Detailed Item
1
Display Mode Standard
Display Item None
Display
SettingReturn
• Display the Display menu. (See "Display Mode" on
page 52).
• Press the
(Up/Down) buttons to select
Display Item and press the Menu/Enter button.
2
None
Display
Display Item
SettingReturn
• Press the (Up/Down) buttons to display the
following.
Room Temp
System
* Some models may not display these items even if they are
selected.
• Be sure to read the following regarding the display of the room
and outdoor temperature.
Room Temp
– The temperature near the remote controller.
– The temperature that is detected may be affected by the
location of the unit.
– It is possible to switch between the remote controller or the
indoor unit for the used temperature sensor. For detailed
information, refer to the Field Settings in the Installation
Manual.
Outside Air Temp
– The temperature detected near the outdoor unit.
– The temperature that is detected may be affected by factors
such as the location of the unit (e.g if it is in direct sunlight)
and unit operation during defrosting.
• Press the Menu/Enter button to conrm the
settings and to return to the Basic Screen.
To Next Page
Loading...
