Daikin BRC2E52C - Ventilation Operation

BRC2E52C7 / BRC3E52C7 Operation manual
4P368042-1 - 2014.02
18
Basic Operation Method
Operation Method
Setback should not be enabled when a centralized controller is connected.
1
35°C
The setback icon " " ashes when the unit is turned ON under
the setback control.
The fan speed cannot be changed when setback is active and as
a result, the fan speed is not visible.
Ventilation Operation
Preparation
• For mechanical protection purposes, turn ON the air conditioner at least 6 hours before
starting the operation of the system.
• Do not turn OFF the air conditioner in season in order to ensure the smooth starting of the air
conditioner.
• Press the Operation Mode Selector button several times until the ventilation mode is
selected.
1
• The Ventilation mode is used on Heat Reclaim
Ventilation (HRV) units for when cooling or heating
is unnecessary.
2
• The Ventilation mode can be changed in the Main Menu
(See "Ventilation Mode" on page 34).
Note
Ventilation modes: Auto, Energy Reclaim Ventilation and Bypass
3
• The Ventilation rate can be changed in the Main Menu
(See "Ventilation Rate" on page 33).
Note
Ventilation rates: Low or High
(HRV only)
Operation Method