Field Setting from Remote Controller ESIE15-13B
72 Field Setting
Airflow Direction Setting
Set the air flow direction of indoor units as below. (Set when optional air outlet blocking pad has
been installed.)
Airflow Range Setting
Make the following air flow direction setting according to the respective purpose.
* Some indoor unit models are not equipped with draft prevention (upward) function.
Individual Setting of Ventilation
This is set to perform individual operation of heat reclaim ventilation using the remote controller/
central unit when heat reclaim ventilation is built in.
(Switch only when heat reclaim ventilation is built in.)
Mode No. First Code No. Second Code No. Setting
13 (23) 1
01 F: 4-direction air flow
02 T: 3-direction air flow
Mode No.
First Code
No.
Second
Code No.
FCQG FHQG
13 (23) 4
01 Draft prevention (Upward) Draft prevention (Upward)
02 Standard
Dew condensation
prevention (Upward)
03
Ceiling soiling prevention
(Downward)
Standard (Downward)
Mode No. First Code No. Second Code No. Setting
15 (25) 5
01 —
02 Individual operation of ventilation