Daikin FTXS36HVJU - Page 136

SiUS04-924_A Indoor Unit
128 Removal Procedure
3. Release the grounding
and the indoor heat
exchanger thermistor.
1
Remove the screw and
release the ground
wire.
2
Pull out the indoor heat
exchanger thermistor.
 Be careful not to lose the clip of
the thermistor.
4. Remove the electrical
box.
 You can remove the electrical
box without detaching the
terminal board.
1
Disconnect the 4
connection wires on the
terminal board.
Remove the screw and
remove the wire
retainer.
Step
Procedure Points
1
2
3
(R9497)
Earth
1
2
3
(R9498)
Indoor heat exchanger thermistor
Clip
(R11268)
1
2
3
(R9499)
Terminal board
Wire
retainer