SiUS04-924_A Field Settings
186 Trial Operation and Field Settings
4.3 When 2 Units are Installed in 1 Room
When 2 indoor units are installed in 1 room, 1 of the 2 pairs of indoor unit and wireless remote
controller can be set for different addresses.
Both the indoor unit PCB and the wireless remote controller need alteration.
Indoor Unit PCB Cut the address-setting jumper JA on the control PCB.
Wireless Remote
Controller
Cut the address-setting jumper.
(R9665)
JA
JA
EXIST
CUT
ADDRESS
1
2
ADDRESS
(R13525)
ADDRESS
EXIST
CUT
1
2
Jumper