ECONO Operation
ECONO operation is a function which enables efficient operation by limiting the
maximum power consumption value.
This function is useful for cases in which attention should be paid to ensure a circuit
breaker will not trip when the product runs alongside other appliances.
To start ECONO operation
Press during operation.
To cancel ECONO operation
Press again.
• " " is no longer displayed on the LCD.
• " " is displayed on the LCD.
Running current and
power consumption
Normal
operation
Maximum during
normal operation
Maximum during
ECONO mode
ECONO
mode
Time
From start up until set
temperature is reached
• This diagram is a representation for illustrative purposes only.
The maximum running current and power consumption of the air conditioner in ECONO
operation vary with the connecting outdoor unit.
NOTE
Notes on ECONO operation
• ECONO operation can only be set when the unit is running. Pressing the operation stop button causes the settings to be canceled, and the
" " is no longer displayed on the LCD.
• ECONO operation is a function which enables efficient operation by limiting the power consumption of the outdoor unit (operating frequency).
• ECONO operation functions in AUTO, COOL, DRY, and HEAT operation.
• POWERFUL and ECONO operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
• If the level of power consumption is already low, ECONO operation will not drop the power consumption.
To Next Page
Loading...
