SiUS04-924_A Outdoor Unit
156 Removal Procedure
2. Outdoor Unit
Note: The illustrations represent heat pump models.
2.1 Removal of Outer Panels
Procedure Warning Be sure to wait for 10 minutes or more after turning off all power supplies
before disassembling work.
Step Procedure Points
1. Features
2. Remove the suction grille. The hooks are secured in the
clearances of the outdoor heat
exchanger fins.
1
Release the 3 hooks at
the upper first, and then
3 hooks at the middle.
2
Release the 3 hooks at
the bottom and remove
the suction grille.