Daikin FTXS36HVJU - Removal of Pcbs

Indoor Unit SiUS04-924_A
Removal Procedure 133
1.4 Removal of PCBs
Procedure Warning Be sure to wait for 10 minutes or more after turning off all power supplies
before disassembling work.
Step
Procedure Points
1. Remove the signal
receiver PCB.
1
Cut the clamp.
2
Release the harness
from the hook.
 When reassembling, make sure
to hook the harness.
3
Push and unfasten the
hook of the signal
receiver unit.
(R9513)
Clamp
(R9514)
Hook
(R13518)
Hook
Signal
receiver
unit