AUTO · DRY · COOL · HEAT · FAN Operation
The air conditioner operates with the operation mode of your choice.
From the next time on, the air conditioner will operate with the same operation
mode.
To start operation
Press and select a operation mode.
1.
• Each pressing of the button advances the mode setting in sequence.
COOLING ONLY
model
HEAT PUMP
model
DRY COOL
FAN
AUTO
DRY COOL HEAT
FAN
2.
Press .
• " " is displayed on the LCD.
• The OPERATION lamp lights up.
•
Control panel
To stop operation
Press again
• " " is no longer displayed on the LCD.
• The OPERATION lamp goes off.
To change the temperature setting
Press or .
• The displayed items on the LCD will change whenever either one of the buttons is pressed.
DRY or FAN mode COOL mode HEAT mode AUTO mode
The temperature setting is not
variable
64-90˚F
(18-32˚C)
50-86˚F
(10-30˚C)
64-86˚F
(18-30˚C)
Press to raise the temperature and press to lower the
temperature.
To Next Page
Loading...
