Daikin FTXS36HVJU - Page 153

Indoor Unit SiUS04-924_A
Removal Procedure 145
4
Remove the 2 pivots.
5
Remove the swing
motors. Caution
When reassembling, do not
confuse the installing order of
the 2 motors and the colors of
the connectors.
If you set the connectors or
motors opposite, the
horizontal blades might not
move smoothly and could
cause sounds. (1)Set the
swing motor for the upper blade
first.
(connector: white)
(2) Then, set the swing motor for
the lower blade.
(connector: red)
(3) Fix both the swing motors with a
screw.
6
Disconnect the
connector to remove
the swing motor.
Step
Procedure Points
(R9549)
(R9550)
Swing motor (lower blade)
Swing motor (upper blade)
(R9551)