INTELLIGENT EYE Operation
"INTELLIGENT EYE" is useful for energy saving
Energy saving operation
• Change the temperature –3.6˚F (–2˚C) in heating / +3.6˚F (+2˚C) in cooling / +3.6˚F (+2˚C) in dry mode from set temperature.
• Decrease the airflow rate slightly in FAN mode only.
• If no presence detected in the room for 20 minutes.
NOTE
Notes on "INTELLIGENT EYE"
• Application range is as follows.
Vertical angle 90˚
(Side view)
Horizontal angle 110˚
(Top view)
90˚
55˚
55˚ 55˚
23ft (7m)
23ft
(7m)
• Sensor may not detect moving objects further than 23ft (7m) away. (Check the application range)
• Sensor detection sensitivity changes according to indoor unit location, the speed of passersby, temperature range, etc.
• The sensor also mistakenly detects pets, sunlight, fluttering curtains and light reflected off of mirrors as passersby.
• INTELLIGENT EYE operation will not go on during POWERFUL operation.
•
NIGHT SET mode will not go on during use of INTELLIGENT EYE operation.
Page 20
To combine "COMFORT AIRFLOW operation" and "INTELLIGENT EYE
operation"
To cancel "COMFORT AIRFLOW operation" and "INTELLIGENT EYE
operation"
1.
2.
Press and select " " on the LCD.
Press .
• Each time the is pressed a different setting option is displayed on the LCD.
Blank
• Press the button to select "Blank".
• The air conditioner can go into operation with the COMFORT AIRFLOW and INTELLIGENT EYE functions combined.
• The volume of air will be set to AUTO. If the upward and downward airflow direction is selected, the COMFORT AIRFLOW operation will be
canceled.
Priority is given to the function of whichever button is pressed last.
• Do not place large objects near the sensor.
Also keep heating units or humidifiers outside the sensor's detection agree. This sensor can detect undesirable objects.
• Do not hit or violently push the INTELLIGENT EYE sensor. This can lead to damage and malfunction.
CAUTION
To Next Page
Loading...
