Instructions SiBE01-503
40 System Configuration
2.6 POWERFUL Operation
13
POWERFUL Operation
POWERFUL operation quickly maximizes the cooling
(heating) effect. You can get the maximum capacity.
■
To start POWERFUL
operation
1. Press “POWERFUL button”.
•
POWERFUL operation ends in 20 minutes.
Then the system automatically operates
again with the settings which were used
before POWERFUL operation.
• When using POWERFUL operation,
there are some functions which are not
available.
• “ ” is displayed on the LCD.
■
To cancel POWERFUL
operation
2. Press “POWERFUL button”
again.
•
“ ” disappears from the LCD.
NOTE
■
Notes on POWERFUL operation
•
POWERFUL operation is not available in modes other than cooling or heating.
•
In COOL and HEAT mode
To maximize the cooling (heating) effect, the air flow rate be fixed to the maximum setting.
The temperature and air flow settings are not variable.
1,2
To Next Page
Loading...
Need help?
General
