Daikin FVXM50A2V1B - To Mount the User Interface Holder; About the Clock; To Set the Clock

5 | Before operation
User reference guide
18
CVXM20+FVXM25~50A2V1B
Split system air conditioners
4P625990-1A – 2020.10
5.4 To mount the user interface holder
cba
2×
a User interface
b Screws (field supply)
c User interface holder
1 Choose a place where the signal can reach the unit.
2 Fix the user interface holder (accessory) to the wall or a similar location using
2 M3×20L screws (field supply).
3 Insert the user interface into the user interface holder.
5.5 About the clock
If the indoor unit's internal clock is NOT set to the correct time, the ON timer, OFF
timer and weekly timer will NOT operate correctly. The clock must be set again:
▪ After a circuit breaker has turned the unit OFF.
▪ After a power failure.
▪ After replacing batteries in the user interface.
5.5.1 To set the clock
Note: If the time is NOT set, , , and blink.
1 Press .
Result: and blink
2 Press or to set the current day of the week.
Display Day of the week
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday