Daikin Intelligent Touch Manager DCM601A71 - Setting up and Changing the Confirm Operation

User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
131
6-9 Setting up and Changing the Conrm Operation
You can set up and change the setting for displaying or not the dialog box that conrms the start/
stop operation performed from the iTM Standard View screen.
<Confirmation dialog>
1. Touch the Confirmation Dialog button on the System Settings tab of the Menu List screen to
display the Conrmation Dialog screen (see page 54).
(1)
2. Select Enable for the Conrm Setup radio button (1) to display the Conrm dialog, and Disable
to not display.
3. Touch the OK button to save and close the screen.