Daikin Intelligent Touch Manager DCM601A71 - Backing up

User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
133
6-11 Backing up
You can back up various iTM data to a USB memory. You cannot perform any operation from the
iTM unit screen during backup. However, functions will be working normally.
You can copy the backed up data to a computer for the purpose of management.
Use a USB memory of 32 GB or less. The iTM supports USB2.0.
1. Touch the Backup button on the System Settings tab of the Menu List screen (see page 54).
2. When the dialog that conrms the start of the backup is displayed, connect the USB memory to
the iTM unit and touch the Yes button.
3. All les on the connected USB memory will be deleted. Touch the Yes button on the Conrm
dialog that appears to commit and start the backup.
4. Backup takes up to 30 minutes per 1 GB. Backup is complete when the message “Backup is
complete.” appears. Touch the Close button to close the screen.