Daikin Intelligent Touch Manager DCM601A71 - Collecting Data and Outputting the Power Proportional Distribution Results

User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
224
Select the Month radio button (b) to set the Account Date. The data collection period is determined
as the month from the Account Date of the previous month.
For example, if the date on the iTM unit is October 20th, and Account Date is set to the 20th, then
proportional distribution is calculated for the period from September 20th to October 19th.
Touch the Modify button and enter the Account Date. You can enter a value in the 1 to 31 range.
However, if the specified counting date does not exist in the month, the counting period will be
automatically adjusted to match the calendar dates.
(2) is the button for making advanced settings that are normally unused.
Collecting data and outputting the Power Proportional Distribution results
(4)
(3)
Touching the Execute button (3) displays a conrmation dialog. Connect the USB memory to the
iTM unit and touch the Yes button to start data collection and CSV le output.
Data collection may take up to 30 minutes. When data collection nishes, a list of the periods and
results of the data collection appears in (4).
If the USB memory is not connected, data is collected and the collection results displayed but no
le is output.