Daikin Intelligent Touch Manager DCM601A71 - Setting up the E-Mail Error Report; Setting up the Mail Server

User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
216
9-3 Setting up the E-Mail Error Report
An iTM with network setting can send E-mails with date of occurrence, error code, and other
information to E-mail addresses set in advance when an error such as equipment error or analog
upper/lower limit error occurs in a management point.
An SMTP server and a terminal for receiving E-mails are necessary in addition to the iTM unit.
NOTE
The following describes how to set this up.
Setting up the Mail Server
Touch the E-mail button on the System Settings tab of the Menu List screen and display the E-mail
Settings screen (see page 54).
(1)
Touch the Edit button (1) and display the Server dialog. The dialog consists of two tabs:
Transmission and E-mail Server. Switch and set up each of the tabs. When nished, touch the OK
button to save and return to the E-mail Settings screen.