Daikin Intelligent Touch Manager DCM601A71 - Using Standard Functions; 5 Setting up the Automatic Control; Setting up a Schedule; Setting up a Schedule Program

User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
61
5. Setting up the Automatic Control
5-1 Setting up a Schedule
The schedule control function in iTM allows you to operate designated management points and
areas according to a schedule program. There are two types of schedule: a weekly schedule where
settings are by day of the week, and an annual schedule where you can specify special days. You
can also specify a validity period for a schedule and make it valid only for a certain period of time.
The following tables show items you can control using this function.
Target On/Off
On/Off
(Pre-cool/
Pre-heat)
On/Off
(Setback)
Operation Mode
Indoor unit
Ventilator × × ×
Chiller
× ×
Dio × × ×
Ao × × × ×
Area
Target Fan Speed Setpoint
Setpoint
shift
Ventilation
mode
Ventilation
amount
Indoor unit
× ×
Ventilator × × ×
Chiller × × × ×
Dio × × × × ×
Ao × × × × ×
Area
Target
Remote Controller Enable/Disable
Timer Extension Analog value
Setpoint
range restriction
Start/Stop Setpoint
Operation mode
setup
Indoor unit
×
Ventilator × × × × ×
Chiller
× × ×
Dio × × × × × ×
Ao × × × ×
×
Area
Setting up a schedule program
The following describes how to create and set up a schedule program based on the model case below.
Name of schedule program: Program for Ofce
Target: Ofce A (area comprising indoor units only)
Every week, from Monday to Friday: 9:00 to 18:00 Setpoint 82°F Cool On
Every week, Saturday and Sunday: Holiday Off
Every month, 3rd Saturday only: 9:00 to 18:00 Setpoint 82°F Cool On
Using Standard Functions