Daikin Intelligent Touch Manager DCM601A71 - Starting;Stopping Areas and Management Points

User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
23
(3)
(3) Touch the Up button to move one level up from the currently selected one.
(For detailed operation, see page 37.)
2-3 Starting/Stopping Areas and Management Points
(2)
(1)
(1) Select the area or management point you want to start or stop.
(2) Selecting “Start” in the On/Off combo box starts the selected area or management point while
selecting “Stop” stops the selected area or management point. The icon turns green or red
(depending on the system settings) when the selected area or management point has been started
while the icon turns gray when it is stopped.
(3) (3)
(3) When Conrm is “enabled” in the system settings, a conrmation dialog appears accordingly.
Press the Yes button to commit. (For detailed operation, see page 131.)