Daikin Intelligent Touch Manager DCM601A71 - Enabling;Disabling Remote Controller

User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
27
2-6 Enabling/Disabling Remote Controller
(1)
(2)
(4) (a)
(5)
(4) (b)
(5)
(4) (c)
(5)
(3)
(6)
(1) Select the area or management point for which you want enable/disable remote controller.
(2) Touch the Setting button and display the Detailed Setup screen.
(3) Select the R/C Prohibition tab.
(4) You can permit/prohibit the following remote controller operations: (a) start/stop, (b) set up the
operation mode, and (c) set up the setpoint.
(5) Select the check box of the operation you want to set up and select its detail from the radio
button.
(6) Touch the OK button to commit and close the screen.
(For detailed operation, see page 41.)