Daikin Intelligent Touch Manager DCM601A71 - Page 142

User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
141
<Interlocking Control CSV le format>
Shadowed data are xed strings (However, language support is provided)
A B C
Blank
Controller Name Controller name
Export Date Output date
iTM Version iTM version
Program Name Program name
Enable/Disable
Program enabled/disabled
Enable/Disable
Input
Mgmt. Point Detection Conditions Timer (min.)
Management point name Detection Target Continuous completion time
Ditto Ditto Ditto
; ; ;
Output 1
Detection Conditions Input condition for interlocked output
Start/Stop Interval (sec.) Sequential start/stop interval
P/A Name Action
Area/Mgmt. Point Area/Management point name
Management point/area action
For details on the information displayed,
see the display text for event actions
described in the Interlocking Control
Functional Specications.
Ditto Ditto Ditto
; ; ;
Output 2
Detection Conditions Same as Output 1
Start/Stop Interval (sec.) Same as Output 1
P/A Name Action
Same as Output 1 Same as Output 1 Same as Output 1
; ; ;
Blank
Program Name Program name
; ; ;
The settings of the second or subsequent program will be output following above.