Daikin Intelligent Touch Manager DCM601A71 - Page 188

User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
187
Setting
location
Item Setting details
Possible range [ : Visible, : Conditionally visible,
×: Invisible, Between ( ) : Numerical range]
Remarks
Management point type
Area
Indoor unit Ventilator Chiller Dio Analog (Ao)
Events Screen
A/C tab
Setpoint Restriction
Cooling Limit
Enable/Disable
Enable
Only Detailed Setup
for centralized
monitoring,
Schedule
Disable
MAX
Celsius Example: 32°C
Fahrenheit Example: 90°F
MIN
Celsius Example: 16°C
Fahrenheit Example: 60°F
Heating Limit
Enable/Disable
Enable
Disable
MAX
Celsius Example: 32°C
Fahrenheit Example: 90°F
MIN
Celsius Example: 16°C
Fahrenheit Example: 60°F
Ventilator tab
Ventilation Amount
Auto (normal) ×
*3*4 × × ×
When Ventilation
Mode is disabled for
the selected Ventilator
management point,
the tab itself is hidden.
Low (normal) × *3 × × ×
High (normal) × *3 × × ×
Auto (fresh up) × *3*4*5 × × ×
Low (fresh up) × *3*5 × × ×
High (fresh up) × *3*5 × × ×
Ventilation Mode
Automatic ×
*3 × × ×
ERVentilation × *3 × × ×
Bypass × *3 × × ×
Dio tab
Repeat Mode
Enable/Disable
Enable
Only Detailed Setup
for centralized
monitoring
Disable
Interval
1
2
3
4
5
6
7
8
9
10
Ao
tab
Analog Example: 0.00 × × × ×
*6
(–9999.99~
9999.99, w/o unit)
*1 Not displayed when Setback Control is disabled.
*2 Not displayed when Operation Mode (Dry) is disabled.
*3 Not displayed when Ventilation Mode is disabled.
*4 Not displayed when Ventilation Amount/Auto Air Volume is disabled.
*5 Not displayed when Ventilation fresh up is disabled.
*6 The value will be displayed in set unit, upper/lower limit range, displayed accuracy.
*7 Displayed in °C or °F depending on the unit selected in the System Settings.
*8 Grayed out when Setpoint is selected.
*9 Grayed out when Setpoint shift is selected.