User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
250
Two operation rules are provided by default. Customize them as necessary for your use as their
contents can be changed and/or deleted.
• Failure to turn off
Day of the week: Monday to Sunday, No special day settings/Operating hours: 9:00 to 21:00
(AM9:00 to PM9:00 when 12-hour clock is used)/Setpoint: None
• Setpoint gap
Day of the week: Monday to Sunday, No special day settings/Operating hours: 9:00 to 21:00
(AM9:00 to PM9:00 when 12-hour clock is used)/Setpoint: Cool 75°F, Heat
75°F
The following describes how to set this up and use.
• Setting up the Equipment Operation Rules
Set up the equipment operation rules.
Display the Energy Navigator tab on the Menu List screen (see page 57).
(61)
Touch the Equipment op. Mgmt. button (61) and display the Equipment operation management
screen. The Equipment operation management screen consists of two tabs: Failure to turn off
and Setpoint gap.
To Next Page
Loading...
