Daikin Intelligent Touch Manager DCM601A71 - Page 290

User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
289
• Do not press the switch with excessive force. Doing so may damage the components and
cause malfunction.
• If electronic components in the iTM are charged with static electricity, it may cause
malfunction.
Be sure to discharge the static electricity accumulated in your body before attempting any
operation. To discharge yourself, touch a grounded metal object (control panel, etc.).
CAUTION
■
When operating on the Standard View screen, touch sound is heard even when an area not
allocated for a button is pressed.
• The iTM screen is designed to sound wherever it is touched. This is normal.
■
The screen ickers at a regular interval.
• The Standard View screen of the iTM is refreshed every 3 seconds to reflect the air
conditioners current status. The screen ickers each time it is refreshed, but this is normal.
■
The operation performed by touching the iTM screen takes some time to be reflected on the
screen view.
• Depending on the status of the communication with the connected air conditioners, update of
the screen view may take some time. Please wait a few seconds.
■
LCD display
• LCD displays are produced using high precision technology but there may be some dots that
never go on, or dots that are permanently on. Furthermore, the LCD display may generate
unevenness due to temperature change and the like. However, these are phenomena inherent
to LCD panels, and are not faults.
■
An indoor unit lter sign is ON on the Standard View screen.
• The lter sign does not go off even when the air conditioner lter has been cleaned and the
cleaning sign has been reset using remote controller.
The lter sign on the Standard View screen is designed to go off only when the cleaning signs
for all of the air conditioners in the group are reset.
Check for any air conditioner in the group with the cleaning sign ON apart from the cleaned air
conditioner.