User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
53
(6) Sliding Temp. (Optional function)
This function controls the indoor unit’s setpoint in accordance with the outdoor temperature to keep
the difference between the outdoor and indoor temperatures within a certain range.
It only works in Cool mode.
(7) HMO (Optional function)
This function automatically starts/stops the indoor unit when it is operating in Heat mode.
This function avoids unnecessary rise in the room temperature.
(8) Timer Extension
This function sets up the time to stop the indoor unit and prevent the failure to turn it off.
(9) Temp. Setback (Optional function)
This function keeps the room temperature within the setpoint and limits the energy consumption
during absence.
To Next Page
Loading...
