Daikin Intelligent Touch Manager DCM601A71 - Page 60

User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
59
• Icon View in Each Status
Start (*1) Setback Active Setback Inactive Stop/No operation
Area
When there is at least
one management point
in the area that is start
(*1)
When there is at least
one management point
in the area where
Setback is active
When there is at least
one management point
in the area where
Setback is inactive
• When all management
points in the area are
Stop/No operation
• When there are no
management points in
the area
Management
point
Unit/Limit Error
(*2)
Communication error Emergency Stop Maintenance
Area
When there is at least
one management point
in error in the area
(Error sign is displayed
over start, Stop/No
operation icon)
When there is at least
one management point
with communication
error in the area
When there is at least
one management point
in emergency stop in
the area
When all management
points are in mainte-
nance in the area
Management
point
(*1) The icon color is displayed in the color congured in the System Settings.
(*2) For outdoor units, no Equipment error icon is displayed even if an error is detected.
• Priority order of management point icons
When two or more statuses overlap, that with the highest priority is displayed with an icon.
“Start/Stop/Setback Active/Setback Inactive/No operation” < “Unit/Limit Error” <
“Communication error” < “Maintenance” < “Emergency stop”
• Priority order of area icons
When the area includes two or more management points with different statuses, that with the
highest priority is displayed with an icon.
“Maintenance” < “Stop/No operation” < “Setback Inactive” < “Setback Active” < “Start” <
“Communication error” < “Unit/Limit Error” < “Emergency Stop”
NOTE