User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
65
4. Setting up the operation mode and setpoint
(8)
Select the On/Off check box (8) and then, the Start radio button.
To set up the operation mode and setpoint, touch and display the A/C tab.
(9)
(10)
(11)
Select the Operation Mode check box (9) and then, “Cool” from the combo box.
Select the Setpoint check box (10) and then, the Setpoint radio button (11). Touch the Modify
button. Enter “82” in the Numerical Input dialog and touch the OK button to return to the A/C
tab (Events screen).
To Next Page
Loading...
