User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
94
• Setpoint shift is a function that allows you to set up the setpoint with respect to the current
setpoint.
“
Decrease the temperature settings
” increases the setpoint for Cool mode, while for Heat
mode, it decreases the setpoint by the specied shift amount.
“
Increase the temperature settings
” decreases the setpoint for Cool mode, while for Heat
mode, it increases the setpoint by the specied shift amount.
•
Setpoint shift does not work when the operation mode is Fan, Automatic or Dry.
NOTE
(3) Fan Speed setup area
Sets up the fan speed.
Touching the button increases the fan speed by one level while touching the button
decreases the fan speed by one level.
The fan speed you can set depends on the target.
(4) Timer Extension setup area
Sets up the function that prevents failure to turn off the indoor unit.
Select whether to enable (On) or disable (Off) the function using the combo box.
(5) Setpoint Restriction setup eld
Sets up the setpoint restriction.
Respectively enable or disable the setpoint restrictions for cooling and heating using the combo
boxes.
Touch the respective Modify buttons and enter the maximum and minimum values in the
Numerical Input dialog that appears.
The range of values you can enter is the same as that for the Setpoint (2) but the entered values
should be such that they do not invert the upper and lower limits.
This eld is not displayed when the Setpoint Restriction function is disabled for the target indoor
unit’s management point.
(6) OK button
Saves the edit and closes the screen.
(7) Cancel button
Cancels the edit and closes the screen.
To Next Page
Loading...
