Daikin Intelligent Touch Manager DCM601A71 - Page 97

User’s Manual EM11A017
DCM601A71 intelligent Touch Manager
96
• Ao Tab (Events Screen)
This screen is displayed when you touch the Ao tab on the Events screen.
It allows you to set up the Ao actions.
(1)
(2) (3)
Select the check box of the item to set up, and enter the setting using the Modify button.
(1) Analog Value setting area
Sets up an analog value.
Touch the Modify button and enter the analog value in the Numerical Input dialog that appears.
The range of values you can enter must be within the upper and lower limits, and with the
accuracy dened in the Ao’s management point.
(2) OK button
Saves the edit and closes the screen.
(3) Cancel button
Cancels the edit and closes the screen.