Need help?Do you have a question about the Daikin RYS50B2VMB and is the answer not in the manual?
Disconnect the fan motor connector.
Remove service monitor and main PCBs after unfastening hooks.
Disconnect main PCB connectors and compressor relay connector.
Loosen the screw of the four way valve coil.
Heat and disconnect brazed parts of the four way valve.
Remove putty sheets and heat brazed parts for removal.
Remove compressor nut, heat and disconnect discharge/suction sides.
Lift the compressor up and remove it.
General| Category | Air Conditioner |
|---|---|
| Model | RYS50B2VMB |
| Type | Split System |
| Cooling Capacity | 5.0 kW |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Dimensions | 990 x 298 x 212 mm |
| Outdoor Unit Dimensions | 845 x 595 x 300 mm |
| Weight (Indoor Unit) | 13.5 kg |
| Weight (Outdoor Unit) | 36 kg |
| Indoor Unit Dimensions (WxHxD) | 990 x 298 x 212 mm |
| Outdoor Unit Dimensions (WxHxD) | 845 x 595 x 300 mm |
| Indoor Unit Weight | 13.5 kg |
| Outdoor Unit Weight | 36 kg |
| Refrigerant | R410A |
To Next Page
