Cinemix Recording Console
The D&R Cinemix is a 24 buss, dual path in-line format recording and mixing
console designed to take the central role in a recording/mixing facility.
With up to 30 projects storable, the wasted time between sessions is a thing of
the past.
An essential part of Cinemix is his ARM (Advanced Routing Multiplex).
With ARM you can digitally route any input in Cinemix to a number of places
and be able to recall all stored setups by a couple of key strokes. This feature
alone saves valuable time between sessions.
A first in mixing console technology is Cinemix's surround master section with
the ability to mixdown a 5.1 surround mix, fully automated.
Easy monitoring of all surround outputs is standard and automated Joysticks
with Virtual Vision makes 360 degrees panning very easy to lay down in the final
mix.
Completely modular, Cinemix can be configured precisely to suit your particular
system requirements. A Cinemix standard is the internally wired patchbay on the
right end and interfaces with all external equipment using
25 pin sub D connectors, and chassis mount XLR connectors.
To become completely familiar with your Cinemix and gain the maximum benefit
from his use, we recommend that you read this manual thoroughly.
It will provide important information about all aspects of Cinemix including;
installation, operation, and servicing.
Head Office / Factory
D&R Electronica Weesp B.V.
Rijnkade 15B
1382 GS Weesp
The Netherlands
Tel: (-) 31 294 418 014
Fax: (-) 31 294 416 987
Website: http://www.d-r.nl
E-mail: info@d-r.nl
Cinemix manual page: 6
To Next Page
Loading...
