Danfoss 101N0715 User Manual

TOOL
COOL
4
®
BD Controller
101N07xx Series
24 V DC
11
DEHC.PS.100.I1.02
3. Tool4Cool® software interface
3.1 User interface
ThecontrollercanbeprogrammedandoptimizedfromaPCusingtheTool4Cool®software
AnexampleoftheTool4Cool®userinterfaceshowingthemainparametergroupsoftheBD350GH
compressor is shown below.
Example:
3.2 Operation
TheTool4Cool®softwareenablestheusertoobserveanddocumentcertainaspectsofthecompressor
operation via the controller. The output of the software is in the form of data logs and plots.
UsingTool4Cool®theusercanalsochangethesettingsofthecontrollerparameters,andcopysettings
from one controller to another.
Please refer to the Tool4Cool® LabEdition Operating Instructions for operation instructions.
EXAMPLE
menus may diff er

Danfoss 101N0715 Specifications

General

Brand	Danfoss
Model	101N0715
Category	Controller
Language	English