Danfoss EM-PME375 Series - 4.3. Customer connection interface design instruction

Customer connection interface design instruction
Introduction
This document describes the necessary design loads and tolerances for designing connection
interface for Danfoss  integrated electric machines (EM-PME375-T150  and EM-PME375-T200).
Design loads for EM-PME375-T150  rotor
F
mgn
= Magnetic force between rotor ja frame
G = Gravitational force of rotor
Figure 11. Design loads for EM-PME375-T150  rotor
EM-PME375
4. Design principles
22 | © Danfoss | Produced By: Danfoss Power Solutions | July 2019
| BC265857345808en-000101