Service policy
Maintenance and service of the electric machine is limited to the procedures described in this
manual. See Chapter
Service parts
below
for a list of available service parts. For further information,
contact Danfoss.
Maintenance and service of the electric machine is limited to the procedures described in this
manual.
For further information, contact Danfoss.
Service parts
The recommended service parts are listed in the table below. Quantity describes the number of
components in a single electric machine. Maintenance procedures not decribed in this manual
require
special tools and instructions. Contact Danfoss for more information and purchasing.
Figure 42. Service parts
Table 8. Service parts
Position Part
Order
number
1
HV connector (standard option).
AMPHONEL ART. NO.
HVBI005R10AMHARD 14977
HV connector (+HVC1 -option).
AMPHENOL ART. NO.
HVBI003R8AMHARD19127101
15687
2 Seal for HV connector plate. T=3 14965
3 LV connector.
TE 1-1564520-1 12 PIN ASSEMBLY FOR 3mm PLATE 11033
4 Seal for LV connector plate.
SEAL. GASKET.
T=3 14956
To Next Page
Loading...
Need help?
General
