Danfoss EvoFlat 4.0 M User Manual

Installation Guide EvoFlat 4.0 Flat Stations for apartments, single- and multi-family houses
16 | © Danfoss | DCS-SGDPT/PL | 2022.01
AN40274706699301-010101
9. DECLARATION
9.1 Declaration of conformity
Category 0 with electrical equipment
EU DECLARATION OF CONFORMITY
Danfoss Redan A/S
Hårupvænget 11
DK-8600 Silkeborg
Denmark
declares on our sole responsibility that the product(s)
EvoFlat
Covered by this declaration is in conformity with the following directive(s), standard(s) or other normative docu-
ment(s), provided that the product is used in accordance with our instructions.
EMC – Directive – 2004/108/EC
EN 61000-6-1 2007. Electromagnetic compatibility –
General standard:
Immunity for residential, commercial and light indus-
try
EN 61000-6-3 2007. Electromagnetic compatibility –
Generic standard:
Emission for residential, commercial & light industry.
Pressure Equipment Directive – 97/23/EC
Equipment category: 0 (article 3.3).
Machinery Directive 2006/42/EC
EN 14121-1. Safety of machinery – Risk assessment
EN 60204-1. Safety of machinery – Electricalequipment
of machines – Part 1:
General requirements.
Silkeborg - 08-10.2014
Place and date of issue
Henrik Daugaard Thomas Bruun Hansen

Danfoss EvoFlat 4.0 M Specifications

General

Brand	Danfoss
Model	EvoFlat 4.0 M
Category	Industrial Equipment
Language	English