Danfoss FC 300 Profibus

FC 300 Profibus
Parameters
9-90 Changed Parameters (1)
Array [116]
Option:
No LCP access
Read only
0-115
*
0
Function:
Holds a list of all the drive parameters deviating
from default setting.
9-91 Changed Parameters (2)
Array [116]
Option:
No LCP access
Read only
0-115
*
0
Function:
Holds a list of all the drive parameters deviating
from default setting.
9-92 Changed Parameters (3)
Array [116]
Option:
No LCP access
Read only
0-115
*
0
Function:
Holds a list of all the drive parameters deviating
from default setting.
9-93 Changed Parameters (4)
Array [116]
Option:
No LCP access
Read only
0-115
*
0
Function:
Holds a list of all the drive parameters deviating
from default setting.
16-84 Comm Option Status Word [Binary]
Range:
0 - FFFF
*
0
Function:
Extended fieldbus comm. option status word. For
more information - see section Troubleshooting.
16-90 Alar m Word
Range:
0 - FFFF
*
0
Function:
Returns the alarm word sen t via the serial
communication port in hex code.
16-92 Warn ing Word
Range:
0 - FFFF
*
0
Function:
Returns the warning word sent via the serial
communication port in hex code.
65
MG.33.C2.02 - VLT is a registered Danfoss trademark