Danfoss FC 300

3.
Select Q5-2 Since Factory Setting to view all
programming changes or Q5-1 Last 10 Changes
for the most recent.
Q5
130BB850.10
Q5-1 Last 10 Changes
Q5-2 Since Factory Setti...
25.9% 0.00A 1(1)
Changes Made
Illustration 5.13 Q5-2 Since Factory Setting
5.5 Parameter Menu Structure
Establishing the correct programming for applications
often requires setting functions in several related
parameters. These parameter settings provide the
frequency converter with system details for the frequency
converter to operate properly. System details may include
such things as input and output signal types,
programming terminals, minimum and maximum signal
ranges, custom displays, automatic restart, and other
features.
•
See the LCP display to view detailed parameter
programming and setting options.
•
Press [Info] in any menu location to view
additional details for that function.
•
Press and hold [Main Menu] to enter a parameter
number for direct access to that parameter.
•
Details for common application set ups are
provided in 6 Application Examples.
About Frequency Converter P...
VLT
®
AutomationDrive Operating
Instructions
38 MG33AM02 - VLT
®
is a registered Danfoss trademark
5
5