Danfoss Link™ HR and Danfoss Link™ PR wireless relay units
Your wireless system includes one or more
wireless relays.
The wireless relay can be used in two ways:
1. In order to implement timer control of e.g.
conventional electric heating panels with
their own thermostat, as well as of lighting
or other electricity-consuming devices.
2. In connection with a room heating solution
for the control of electric heating panels
along with a Danfoss Link™ RS, which main-
tains the desired room temperature.
^
^
21,5
If you have this combination, it is important
that the radiator’s thermostat is set to the
highest possible temperature (which will thus
take the radiator’s thermostat out of play).
For example:
Midnight to 9 p.m. o
9 p.m. to midnight on
For example, set the electric radiator’s
thermostat to its maximum temperature
(if a Danfoss Link RS™ is used; otherwise
this is not necessary)
min. max.
To Next Page
Loading...
