Danfoss Link - Danfoss CF-RU Repeater Unit

Danfoss One®
VÅIOD102Danfoss Heating Solutions
Repeater unit
^
^
21,0
Danfoss
One®
+ +
Danfoss CF-RU Repeater Unit
Your wireless system includes a repeater unit
(signal amplier).
The repeater unit is used to link two wireless
devices which have diculty communicating
with each another.
There are various reasons why a wireless
system may require a repeater unit. For one
thing, the distance between the devices may
be too great. Secondly, building components
(e.g. walls or oors) may absorb the signal
to the extent that a repeater unit becomes
necessary.
The advantage of using a repeater unit is that
it is mains powered and, unlike a battery-
operated device, it can emit signals very
frequently.
The repeater unit thus plays a vital role in your
Danfoss One® system, and it is very important
not to switch it o.
Switching the repeater unit o may result in
parts of your system being unable to commu-
nicate with Danfoss Link
™ CC.
Battery-operated devices which lose their
connection to Danfoss Link
™ CC will attempt
to establish an alternative path of communica-
tion. If this happens, the devices will expend a
signicant amount of battery power because
they will be emitting signals so frequently.
Please note: The repeater unit must remain switched on at
all times!