How can I find out which device I have?
You can easily see which type of relay you
have.
?
Start
House control
If, in the House control menu, you have the
Control on/o menu option, the relay is used
as described in section 1.
If this menu option is not visible, the relay is
used as described in section 2 and the unit
is associated with a room as its heat source,
equipped with a Danfoss Link™ RS.
All weekly scheduling and temperature set-
tings can be entered as described in the rst
part of this guide.
Please note: The wireless relay also functions as a repeater
unit (signal amplier) and helps to ensure
a strong wireless network. The relay must
therefore always be on.
To Next Page
Loading...
