Not so fast - what happens if I come home early one day?
?
What happens when I change a local setting in a room?
Does the Danfoss Link™ CC remember the new setting?
If you are not using the weekly schedule, the
settings you enter in the room will always be
permanent.
^
^
21,0
^
^
22,0
If you are running the weekly schedules and
come home during an Away/Asleep period,
you will most likely nd it necessary to turn up
the temperature. This is possible of course, but
the system will consider this to be an excep-
tion from the rule and not a general prefer-
ence.
^
^
17,0
^
^
21,0
^
^
21,0
^
^
17,0
Our everyday lives do not always run accord-
ing to plan, and sometimes we’re forced to stay
home, say, with a sick child. In such situations,
we don’t want the system to lower the tem-
perature during daytime hours.
In this case, all you have to do is select At
Home on the menu’s start page, and select the
specic rooms in the house, these will then be
set to their At Home temperatures.
The At Home mode will remain active until you
turn it o, so if you use the weekly schedule
function to save energy, remember to turn o
At Home again.
Start
Vacation
Start a special mode
Heat control and settings
At Home
House control
Away/Asleep period
You come home and
turn up the heat
At Home period
Away/Asleep period
Automatically re-
turns to the original
setting
Pause
To Next Page
Loading...
